Extra-flat shower tray waste outlet have hi flow rate, improving by 37% the EN274 norm requirements. Install it in extra-flat shower tray, up to 27 mm in thickness, according to the latest market trends.
Its design has been optimized to cope with up to 150 kg load of charge and easy to install due to 3 fastening points.
Designed for shower trays with minimum height, total height 58 mm, and emovable trap, 30 mm water seal, easier to clean.
Install a shallow shower tray thanks to the We have versions adapted to every shower
reduced height waste outlets. Only 58 mm tray with hole in Ø52, 62 or 90 mm.
in height.
Check the producto in the desired installation. Level the waste outlet, fix it to the waste pipe
area. Sufficient space should be available. by means of solvent (if appropiate) out nout
and joint tightening. Check no leakage appears.
Fill-in the shower tray base according to the Install the shower tray onte the waste outlet,
manufacturer's recommendations. Check in check it perfectly rests onto its top
advance the correct water tightness of the watertightness joint.
connections.
Position the metal flange onto the shower tray Tighten the screws
Insert the trap onto the shower waste outlet Install cover and check it is correctly adjusted
body. Check it correctly fits. onto the metal flange.
Finish the edges of the shower tray with Enjoy a shallow shower tray and a high
silicone (or other insulation) to prevent water drainage flow rate.
infiltration.